MSP430F5418A
Key Features
- Low supply voltage range: 3.6 V down to 1.8 V
- Ultra-low power consumption - Active mode (AM): all system clocks active 230 µA/MHz at 8 MHz, 3.0 V, flash program execution (typical) 110 µA/MHz at 8 MHz, 3.0 V, RAM program execution (typical) - Standby mode (LPM3): real-time clock (RTC) with crystal, watchdog, and supply supervisor operational, full RAM retention, fast wakeup: 1.7 µA at 2.2 V, 2.1 µA at 3.0 V (typical) low-power oscillator (VLO), general-purpose counter, watchdog, and supply supervisor operational, full RAM retention, fast wakeup: 1.2 µA at 3.0 V (typical) - Off mode (LPM4): full RAM retention, supply supervisor operational, fast wakeup: 1.2 µA at 3.0 V (typical) - Shutdown mode (LPM4.5): 0.1 µA at 3.0 V (typical)
- Wake up from standby mode in 3.5 µs (typical)
- 16-bit RISC architecture - Extended memory - Up to 25-MHz system clock
- Flexible power-management system - Fully integrated LDO with programmable regulated core supply voltage - Supply voltage supervision, monitoring, and brownout
- Unified clock system - FLL control loop for frequency stabilization - Low-power low-frequency internal clock source (VLO) - Low-frequency trimmed internal reference source (REFO) - 32-kHz crystals - High-frequency crystals up to 32 MHz
- 16-bit timer TA0, Timer_A with five capture/ compare registers
- 16-bit timer TA1, Timer_A with three capture/ compare registers
- 16-bit timer TB0, Timer_B with seven capture/ compare shadow registers
- Up to four universal serial communication interfaces (USCIs) - USCI_A0, USCI_A1, USCI_A2, and USCI_A3 each support:
